Tomb raider clothing mods. Tomb Raider: Underworld (2008) PC Russian version
This is not the entire wardrobe that exists in this wonderful game, but only the one that I used in my walkthroughs. In principle, this was too much for me, I dressed according to the season, and it was cold almost everywhere. Something like this...
1. Hiking jacket (Expedition Jacket)
2. Leather jacket (Leather Jacket)
3. Gray T-shirt (Gray Henley)
4. Jacket Descendant (Remnant Jacket)
6. Huntress
Complete missions "Reconnaissance Disruption" and "Massive Meal" in the Geothermal Valley
7. Holy Protection (Sacra Umbra)
Complete the quest "Ancient Secrets" in the Geothermal Valley
8. Scout (Infiltrator)
Complete the mission "Unlucky" at the Soviet base
9 Battle Worn
Complete the mission "Defensive Strategy" in the Geothermal Valley
10. Blue T-shirt (Blue Henley)
Community Reward for 2 million tombs
11. Winter white jacket (Whiteout Jacket)
Community Reward for 100 million items
12. Saboteur (Commando)
Buy from the supply hut in the Soviet base
13. Pioneer Outfit
Expedition Mode Endurance Mode
14. Wraithskin
Episode "Baba Yaga: Temple of the Witch" (Baba Yaga: Temple of the Witch)
15. Ushanka
Cold Darkness Awakened Expedition Mode
16 Reimagined Antarctica Outfit
20 Year Celebration Edition and DLC
17. Belladonna (Nightshade)
Wilderness Survivor Pack
18. Ancient Vanguard
Ancient Vanguard Pack
19. Kestrel (Sparrowhawk)
Kestrel Set (Sparrowhawk)
20. Immortal Guardian
Prophet's Legacy Set
21. Valiant Explorer
Valiant Explorer Pack
22. Flying shadow (Shaddow Runner)
Tactical Survivor Kit
23. Heavenly weaver (Spirit Weaver)
Remnant Resistance Pack
24. Stronghold of Hope (Hope's Bastion)
Set "Stronghold of Hope" (Hope "s Bastion)
25. Alpha predator (Apex Predator)
Apex Predator Pack
26. Siberian Ranger
Siberian Ranger Pack
27. Terracotta T-shirt (Rust Henley)
28. Dark Tank Top
1) Click on the icon and select from the list tra.exe. Or, if you did not find it, we find the file in the folder by clicking / [Review]
2) Choose from three items
3) Click on the folder image and select our mod ( *.tpf), or we also find it in the place where you saved it by clicking / [Review]
4) Now click and enjoy our mod!
1) Open the program Texmod. We also select a file. tra.exe(see above)
Press:
1) We tick only:
[v] Show Texture on upper left corner
[v] Replace Texture (with a green texture).
2) B output format choose TGA
3) Log with choose F12(we will save textures with this key during the game, so you can put any key that is convenient for you)
4) Click on the button and find the folder ...\texmod\Out(the textures you copied will be stored there)
5) Click and we are in the game.
6) We go into Lara's Mansion and head to the closet. We choose the costume that you want to remake and dress.
7) Now press the key [+] or [–] until the part of the costume we need turns green (you can press and hold one of the two keys until you see that the part you need turns green)
Download the Adobe Photoshop program and open our scan:
Now we bring our ideas to life. I'll show you simple example. Let's say I want the anniversary top to have stripes on the front. When you're done, save the file with the extension .tga(i.e. just replace the source with a new one) Open again Texmod: Select file tra.exe 1) Choose
2) Click on the button and select the file ...\texmod\Out\TexMod.log
3) Enter the name of the creator (Creator name) and comments (Comment)
4) Click
In the window Build Status should appear Success! 1 Textures added(if you have uploaded one texture, if you have more, a message will appear that you have uploaded 2,3,4…etc textures) 5) We save your new costume in any folder convenient for you in the format .tpf
How to run the finished suit is described in detail in this manual.
A scan of this part will appear in the left corner. 
Introduction
This guide introduces full list costumes available in the game. At the time of writing the guide, there are 31 (+2 closed).
How to choose a suit: go to any base camp and select the weapon menu. (Yes, Lara uses costumes as weapons. Get used to it =)) In the weapons menu, press the RB button on your controller to switch between outfits, or select the costume icon with the mouse. Follow the on-screen prompts to try on the outfits you've unlocked.
The developers released a series of "Gear Up Guides" with detailed renders showing each costume (not all costumes) from different angles. You will find these images in this manual in the table (clickable).
The guide is divided into sections:
1) Costumes unlocked during the story
2) Costumes for side quests
3) Other ways
4) From DLC (as part of a season pass or a separate purchase)
5) Unavailable
How to open?
How to open?
Available at the first base camp.
How to open?
It will open according to the plot of the game.
How to open?
It will open according to the plot of the game after escaping from prison.
Sandy T-shirt
A light gray tank top, quite dirty from exploring ancient tombs.
How to open?
It will open according to the plot of the game.
Reward for side missions
How to open?
Complete missions "Reconnaissance Disruption" and "Massive Meal" in the Geothermal Valley.
How to open?
Complete the quest "Ancient Secrets" in the Geothermal Valley.
How to open?
Run additional task"Unlucky" at the Soviet base.
How to open?
Complete the mission "Defensive Strategy" in the Geothermal Valley.
Another way to get
How to open?
Buy from the supply hut in the Soviet base. The price is 50 coins.
How to open?
Initially open. Community reward for 2 million tombs.
How to open?
Initially open. Community reward for 100 million items.
DLC costumes part 1
pioneer
Traditional geographer costume, orange scarf and vintage pickaxe.
COSTUME AWARD: increased melee damage
How to open?
Included in a paid add-on " Fortitude."
How to open?
Complete the expansion " Baba Yaga: Temple of the Witch."
The costume will unlock after completing the DLC.
How to open?
Expedition mode "Cold Darkness".
Reward for freeing 15 captives in additional mode « Awakening of Cold Darkness» . Having freed, we get a suit. Progress is cumulative! Didn't work on the first pass? We try from the second. I saved up from the second playthrough.
How to open?
Included in the DLC set " survival in the wild" .
How to open?
Included in the DLC set " Ancient Vanguard".
DLC costumes part 2
How to open?
Included in the DLC set " Kestrel".
How to open?
Included in the DLC" Prophet's Legacy".
How to open?
Included in the DLC set " Tactical Survival Kit".
How to open?
Included in the DLC set " Descendant Resistance".
How to open?
Included in the DLC set " Bulwark of Hope".
How to open?
Included in the DLC bundle
A small instruction for changing Lara's clothes, or rather, about repainting standard clothes. To do this, we need the Texmod program to copy textures from the game and some kind of graphics editor, ideally Photoshop, but not necessarily, it all depends on the complexity of the changes made to the texture.
Texmod is good because it does not change anything in the game itself, but simply loads our textures instead of the standard ones. So if something goes wrong, then you simply will not see your textures on the object, their place will be taken by the standard ones. The only drawback in all this is the need to constantly launch the game through TexMod, but you quickly get used to this, since the program is tiny and starts instantly.
On some game resource found Texmod (download) in the same place in the archive there is an instruction for its installation. The skins from the Internet fit perfectly on the model, but the textures were not extracted from the game, Texmod simply did not start in the game.
Editing the registry manually along this path helped (Windows 7)
HKEY_CURRENT_USER\Software\Crystal Dynamics\ tomb raider\ Graphics and there I changed the values in RenderAPI from 0 to 9 .
Now actually about how to pull textures out of the game. Run Texmod.exe, click on the yellow folder icon and specify the path to the game launch file (TombRaider.exe).
Go to the Logging Mode tab.
1. Set or uncheck the boxes so that it is the same as in the picture below.
2. The Output Format drop-down list allows you to select the format for saving textures.
3. The Log with drop-down list sets the key for extracting textures in the game itself.
4. In the Output Folder item, specify the path to the folder where the textures will be saved (it is better to avoid Cyrillic in the path to the folder).
After everything is set up, click Run, the game will start.
Now pressing the keys ( + ) ( - ) on the numeric keypad will iterate over the textures currently loaded in the game. They are displayed in the upper left corner of the screen and at the same time are highlighted in green on the object itself in the 3D world.
After we have found the desired texture, we press the save key (which is indicated in the Texmod settings), I have it F12, thus saving all the necessary textures, after which you can close the game and proceed to editing the textures themselves in the editor.
It should be remembered that there are a lot of textures and they are made for different game quality settings. This means that if you play on medium quality settings, then you need to pull out the textures from these settings. At the time of copying, you should not change the quality settings of the game, since some textures may be mixed with others, unless of course you set yourself such a goal (pull textures from all game settings) It is better, of course, to save and edit the highest quality texture (large), and when the need to resave it in a lower resolution for weak settings games.
We open the folder in which the textures were added and see our files, there is also a text Log file (TeXmod.log) that was created by Texmod, do not delete it, it will still come in handy when repacking our textures into a TPF file.
The game has a lot of textures responsible for appearance T-shirts, but these five mine most influence the final result. In total, I pulled out 7 textures, two of them are the same and differ only in resolution, I don’t know why they are repeated, I didn’t seem to change the quality of the game in the settings. I tried to change only one, but when moving to another level, Lara put on a standard T-shirt, so I decided to redraw all the textures I found at once (that is, we edit one, save it, change the resolution in it and save it as another).
Open the texture in any graphics editor and change it to your liking. I tried to make rags out of a T-shirt, I didn’t want to mess with it for a very long time, so I just sketched several layers on top of the main texture, adding holes and shadows to some. As a result, my T-shirt began to look something like this at the exit from Photoshop after half an hour of fiddling with it, of course, it doesn’t really look like wear, more like an acid attack, but it pleases the eye a little more. :-)
I don’t understand anything in 3D modeling, but in my opinion this texture is responsible for the pseudo-volume, so I filled in the background color with those places where the shirt is torn and the body is visible so that the folds of the fabric do not pass onto the body. By the way, if you overlay a picture without blood stains, then mask the torn spots from the reinforcement, otherwise these folds will be visible on a new and smooth T-shirt.
These two, as I understand it, are responsible for the texture of the fabric, that is, they project the relief of the threads on the surface of the T-shirt. Therefore, I filled the gray alpha channel with black, and filled the green one with the main color (just like the spots in the photo above).
I could have stopped there, but since I made the undershirt blue, I had to touch up the straps on the mud textures as well. These textures do not have to be edited completely and carefully, as they are translucent. But if the color of your main T-shirt is light or even white, then it makes sense to correct the colors on this texture as well or change its transparency (alpha channel).
Now we load the textures into the game, but first we need to pack them into a TPF file.
Run Texmod again, specify the location of the boot file (TombRaider.exe). This time we go to the Package Build tab.
1. In the Definition File section, specify the location of the same text file (TexMod.log) If you suddenly deleted one or more textures, then open this file with notepad and erase the lines related to the deleted files.
2. In the Creator Name and Comment fields, enter a name and a comment (optional). Then click Build.
This window will appear in which you need to specify a name for the saved file (we avoid Cyrillic in the file name) and also specify the path, it is better to save to the same place where the game's boot file and Texmod itself are located.
Depending on the number of textures, computer power, etc. the program will think a little and give this message Success! 7 Textures added. (bottom left)
Well, in the folder with the game, the TR_Blue file with the TPF extension will appear, in fact, this is the "archive" with our modified textures.
It remains to point Texmod to our archive with textures and start the game.
Run Texmod again, specify the location of the boot file (TombRaider.exe).
This time we remain on the open tab Package Mode
1. Click on the icon of a small yellow folder in the middle and specify the path to the created TR_Blue.tpf file.
2. The file name appears in the left box Package Name, select it with one click and click Run.
As a result, the game will start and if everything is done correctly, then Lara will be dressed in the skin we created, and she will look a little sexier. Of course, this is all drawn and somewhat similar to that for the kitchen, but this is not important, the main thing is that we now know how to recolor textures in the game.
Thus, you can create different costumes for Lara, save them to TPF files and operate on them during the game launch.
Here you can clearly see how the mud texture lay on top of the torn T-shirt, partially restoring the torn sections of the fabric, but since I left the color of the upper T-shirt gray, this does not really spoil the picture. Therefore, you need to take this property into account, because if you edit only the main texture, without affecting the mud ones, it may turn out that at some point in the game, a gray and dirty one will lie on top of your colored jersey.
After passing through the waterfall, the mud texture partially disappears and Lara becomes cleaner and more beautiful :-)
A fragment of the video in which Lara is wearing a self-made skin. Unfortunately, the video is very terribly slow, because my computer is very weak to pull the game and write video at the same time.
If you do not simulate discontinuities, then most of what is written above about editing the texture can be skipped altogether. Then it becomes even easier to change Lara's skin, since you won't have to mess around with layers in Photoshop, change transparency in alpha channels, take into account the play of light and shadow, etc. etc. Just apply any pictures you like along the contours of the T-shirt (main texture) and at the output we get such cute T-shirts. By the way, if you add inscriptions to the T-shirt, then those of them that will be superimposed on Lara from the front will need to be mirrored horizontally.
The developers have provided for the wear of Lara's clothes in the course of the story, so the texture is constantly changing during the game, because of this, it fell off for me several times. I had to look again for TexMod's next version of it, redo it and add its next modification to the TPF-archive. In total, the main texture of the T-shirt changes three or four times in the game, I can’t say for sure, since I went through the game and threw it on the shelf. So if you make a universal skin for all quality levels, you will have to re-save each of its modifications four times. As you can see, it's not all that complicated, it's just painted a lot and tediously, if you wish, you can recolor Lara's pants, objects, interior, and indeed any texture in the game.
Tomb Raider: Underworld is a 2008 multi-platform game that introduces gamers to the new adventures of the famous Lara Croft in a familiar style. This part is already the fourteenth game in the extended series, which, against the backdrop of continued popularity, cannot but surprise. According to the plot, the game continues the two previous parts.
Description
This time, Lara learns that the mighty hammer of the god Thor is not a myth or fiction, but a very real artifact. She goes in search of him, and in the course of her adventures she stumbles upon a terrible force that can destroy the whole world. Being involved in the events associated with the possible beginning of Ragnarok, Lara is obliged to embark on the path of saving humanity from total destruction.
Traveling around the world, the heroine will visit many different lands, and in each location she will experience unforgettable adventures and trials. Game levels replicate real-life locations and are recreated with amazing detail. There are other characters in the game, many of which have already met before.
Peculiarities
Another game project about the brave protagonist Lara Croft, finds how to surprise his player. Significant features include:
- amazing realism;
- many interactive objects in the game world;
- new opportunities in shooting and hand-to-hand combat;
- updated heroine healing system;
- a vehicle disguised as a motorcycle;
- elaborated graphic component.
Exploration of the world, reckless fights and many secrets will draw the gamer into game process with a head for many hours. Fans of unlocking additional rewards and testing themselves in the process of obtaining sophisticated achievements will be able to have fun.
