Standard sight cs go through the console. CS:GO crosshair settings and commands. How to change the color of the sight in cs go
Playing the AWP is a problem for many beginners. However, we can smooth over some of the difficulties with the help of special commands. In this article, you will learn how change the thickness of the WUA sight lines And How remove shaking when walking and shooting.
Commands for the AWP scope in CS:GO
Recently, a team has appeared that makes it much easier to play with the AWP. There are two main problems, scope shaking while shooting and scope shaking while moving. And so, in order to minimize the shaking of the sight, you should use two commands cl_bobamt_lat and cl_bobamt_vert.
The default value of these commands is 0,45 and 0,35 respectively. We can freely change these parameters, and of course we will change them in the direction of reduction. Thanks to these parameters, we can move freely with the crosshair on:
cl_bobamt_lat 0.1
cl_bobamt_vert 0.1
Do I need to remind you how to turn on the console? Okay, press the key tilde ~, if it does not work, enable it in the game options or set the launch parameter -console.
How to make the WUA scope thicker? Changing the thickness of the AVP sight.
Open the console and enter the command:
cl_crosshair_sniper_width
After "width" we put a space and add number(the larger it is, the thicker / wider the sight lines will be). I recommend testing and deciding which crosshair width is right for you.
The advantage of console commands is that you can immediately check each type of sight in battle in order to understand whether it suits you or not. When setting up a crosshair in CS:GO, you cannot do without console commands. By default, in the settings you can only select the color and style of the sight. But through the console or the game config, you can change the sight as you like. This is what we dedicate this article to.
It is worth noting that the sight is an individual setting. You can use the scopes of experienced players, but it's better to sort through and test the many options for setting the scope in CS: GO to understand which one is right for you. I personally tested all the sights for pro players and none of them fit me 100%. But nevertheless, at the end of the article, we will provide the settings for the sights of experienced players (Butcher, Hatton, GeT_RiGhT, f0rest, friberg, Xizt, Fifflaren, cheatbanned, stewie2k sight, etc.). Maybe their scope is right for you.
Crosshair adjustment in CS:GO: the best VIDEO
Crosshair style and color in CS:GO
The standard scope settings are primitive and rather limited, representing only the basic configurations of the scope. The crosshair settings menu can be found in Help->Settings ->Game Options ->Scope. Here you can set the style (classic or default), view (dynamic or static), as well as the color of the crosshair.
ESC->Help-Settings->Game Options->Scope
If these settings are not enough for you, then open the developer console by pressing the tilde, and use the console commands to set the desired type of crosshair.
Crosshair style in CS:GO is set by the command cl_crosshairstyle(0, 1, 2, 3, 4):
- 0 - cs:go is a dynamic, stylized crosshair that is enabled by default. For some, it is the most convenient.
- 1 - cs:go static - the same, only stationary when firing.
- cl_crosshairstyle 2 - cs 1.6.
- cl_crosshairstyle 3 - cs 1.6 dynamic.
- cl_crosshairstyle 4 - cs 1.6 static.
What does the sight look like with and without a dot:
Crosshair stroke in CS:GO
Team cl_crosshair_drawoutline responsible for the outline of the sight. Parameters 0, 1 - you can either turn the stroke on or off.
- cl_crosshair_drawoutline 0 - there is a stroke
- cl_crosshair_drawoutline 1 - no stroke
If the stroke (contour) is on, one more command becomes available - cl_ crosshair_outlinethickness.
An example of the outline of the sight in the photo:
|
|
no stroke |
We pass to the thickness of the contour (stroke) of the sight, it is set by the command - cl_crosshair_outlinethickness and parameters from 0 to 3, where 0 is the thinnest crosshair outline and 3 is the thickest.
- cl_crosshair_outlinethickness 0 - thin outline, not recommended, merges with textures
- cl_crosshair_outlinethickness 1 - the same, rarely used, not visible on many maps
- cl_crosshair_outlinethickness 2 - fits most
- cl_crosshair_outlinethickness 3 - similar
You can also use half values, let's say 0.5, 1.5.
- cl_crosshairthickness 0.5
- cl_crosshairthickness 1.5
- cl_crosshairthickness 2.5
Crosshair size in CS:GO
Another important parameter- scope size. To change the size (reduce) the sight, use the command cl_crosshairsize. Valid values are from 0 to 100, where 0 is a small cs go sight, 10 is a large sight, etc.
In short, to get a small crosshair, just set the command - cl_crosshairsize 1. An example is in the photo below:
|
cl_crosshairsize 1 |
cl_crosshairsize 3 |
Distance between lines of sight
The cl_crosshairgap command is responsible for the distance between the lines of sight. Moreover, this is a command where the values can be negative. If you need to narrow the scope as much as possible, use a value of -5. Popular commands:
- cl_crosshairgap -5
- cl_crosshairgap 0
- cl_crosshairgap 5
Team work examples:
|
cl_crosshairgap 5 |
cl_crosshairgap 0 |
cl_crosshairgap -5 |
Crosshair transparency in CS:GO
A little about transparency. To set the transparency of the sight, use the command cl_crosshairalpha. Available values are from 0 to 255, 3 variations are most often used (0, 127, 255). The lower the value, the more transparent the sight. There are 3 main commands that are used to set transparency:
- cl_crosshairalpha 0 - transparent sight; while its value will not be visible at all.
- cl_crosshairalpha 127 - set the transparency to 50%.
- cl_crosshairalpha 255 - this parameter is often used by pro players, while the crosshair is not transparent and is clearly visible on any maps.
|
cl_crosshairalpha 255 |
cl_crosshairalpha 127 |
If you prefer an opaque sight, it will be enough to use the command cl_crosshairusealpha and turn off transparency, while the command cl_crosshairalpha - will not be taken into account:
- cl_crosshairusealpha 0 - disable transparency
- cl_crosshairusealpha 1 - enable transparency
How to hide or show the crosshair in CS:GO
Logged into the game and don't see the crosshair? A fairly common problem when the sight disappeared for no reason. To turn on the display, write the command cross hair 1, the crosshair should appear. If you write crosshair 0- the target will hide.
If you want to put a standard sight from CS 1.6, then you can do it. How? Read more:
But if you do not like it, then you can change it for this:
- Log into CS:GO
- Start playing on some map
- Press the "Esc" button
- Choose "Help and settings"
- Choose "Game Options"
- In the item "Sight style" select "Classic"
- Press "Back" and "Resume game"
You can add a small dot in the center of the sight, for this, write the following command in the console:
cl_crosshairdot 1
To increase the size of the sight, write the command:
cl_crosshairsize 7 or cl_crosshairsize 10 (can be any value)
To increase the thickness of the sight, write the command:
cl_crosshairthickness 1 (this variable also changes to different values)
That's all. Now the sight has become the same as it was in cs 1.6.
Well, for those who are especially curious and lovers of experiments, and those who like to set up CS longer, or are not satisfied with the standard sight from 1.6, here are the advanced settings of the sight and their description:
And so below each team separately.
cl_crosshairstyle
Sets appearance sight:
cl_crosshairstyle "0" = Standard from CS:GO, dynamic (expands when shooting).
cl_crosshairstyle "1" = CS:GO Standard, static (does not expand when shooting).
cl_crosshairstyle "2" = Classic from CS:1.6, dynamo-statistical (does not expand much when fired).
cl_crosshairstyle "3" = Classic from CS:1.6, dynamic (expands when fired).
cl_crosshairstyle "4" = Classic from CS:1.6, static (does not expand when shooting).
cl_crosshairsize
With the cl_crosshairsize command, you can set the crosshair height (see screenshot above). The higher the value, the higher the aim height.
cl_crosshairthickness
With the cl_crosshairthickness command, you can set the crosshair width (see screenshot above). The higher the value, the greater the scope width.
cl_fixedcrosshairgap
Only possible with a bunch of cl_crosshairstyle "0" and "1" commands.
With the cl_fixedcrosshairgap command, it is possible to change the distance between the beams (strips) of your sight, you can either narrow the distance or widen it. The default value of the command is cl_fixedcrosshairgap "3", the smaller you set the value, the closer the distance of the beams will be.
cl_crosshaircolor
With this command you can set the color of the crosshair.
The following values are available for this command:
0 = Red.
1 = Green (standard).
2 = Yellow.
3 = Blue.
4 = Blue.
5 = Allows you to add your own color.
When setting the value to "5", 3 more values of your colors in RGB colors become available to you. The choice is possible from "0" - weak tonality of colors, to "255" - strong tonality of colors.
cl_crosshaircolor_r
This team puts up red colors.
cl_crosshaircolor_g
This command exposes green colors.
cl_crosshaircolor_b
This command exposes blue colors.
Each of the above three commands can range from "0" to "255", the higher the value, the brighter the color.
cl_crosshaircolor "5"
cl_crosshairstyle "4"
cl_crosshaircolor_r "255"
cl_crosshaircolor_g "51"
cl_crosshaircolor_b "204"
Thus, our crosshair will be pink! You can find a table of RGB colors on the Internet by typing "RBG Color Scheme" into Google.
cl_crosshairusealpha
Only possible with a bunch of cl_crosshairstyle "2" and "4" commands.
With this command you can set the transparency of your sight. If you select "0", you will turn off the transparency and get the full contrast of the crosshair. If "1" is selected, you are given the option to select the transparency of the crosshair with the cl_crosshairalpha command.
cl_crosshairalpha
Only possible with a bunch of cl_crosshairstyle "2" and "4" commands.
With this command you can set the transparency strength from "0" to "255", the higher the value, the less transparency.
Only possible with a bunch of cl_crosshairstyle "2" and "4" commands.
With the value of the cl_crosshairdot command "1" you get a dot in the center of your sight (cross).
I hope you understand everything and this guide helped you.
For those who liked it, like it, well, you can throw off the drop a little, I won't mind. You can't try to cheat. :)
Guide to shooting from sniper rifles in Arma 2, if you liked it and helped you, put Like
How to change crosshair style and color in CS:GO
The cl_crosshairstyle command is used to set the crosshair style in CS:GO
cl_crosshairstyle 0 - default (dynamic)
cl_crosshairstyle 1 - default (static)
cl_crosshairstyle 2 - classic
cl_crosshairstyle 3 - classic (dynamic)
cl_crosshairstyle 4 - classic (static)
To adjust the crosshair color in CS:GO, use the cl_crosshaircolor command
cl_crosshaircolor 0 - red
cl_crosshaircolor 1 - green
cl_crosshaircolor 2 - yellow
cl_crosshaircolor 3 - blue
cl_crosshaircolor 4 - blue
cl_crosshaircolor 5 - custom color
Crosshair with a dot in CS:GO
To add a dot in the middle of the crosshair, you need to use the cl_crosshairdot command:
cl_crosshairdot 0 - no dot
cl_crosshairdot 1 - there is a point
Crosshair stroke in CS:GO
To enable or disable crosshair stroke in CS:GO, use the cl_crosshair_drawoutline command in the console
cl_crosshair_drawoutline 0 - crosshair without outline
cl_crosshair_drawoutline 1 - crosshair with a stroke
In order to set the thickness of the crosshair (outline) of the crosshair, there is the cl_crosshair_outlinethickness command: the parameter can take a value from 0 to 3 (the larger the value, the thicker the outline):
cl_crosshair_outlinethickness 0
cl_crosshair_outlinethickness 2
Crosshair transparency in CS:GO
The cl_crosshairalpha command is used to set the crosshair transparency. The parameters of this command can take values from 0 to 255, the smaller the value, the more transparent the crosshair will be. Here are some examples of using this command:
cl_crosshairalpha 0 - the sight is completely transparent (it is not visible at all)
cl_crosshairalpha 127 - sight is translucent (50% transparent)
cl_crosshairalpha 255 - crosshair is completely opaque
There is also a cl_crosshairusealpha command that enables/disables crosshair transparency. If the transparency mode is disabled, then it will not be possible to set the transparency of the crosshair using the cl_crosshairalpha command.
cl_crosshairusealpha 0 - transparency mode disabled
cl_crosshairusealpha 1 - transparency mode enabled
Those. before using cl_crosshairalpha, you need to make sure that the value of cl_crosshairusealpha is 1 (it is by default).
Crosshair size in CS:GO
The desired crosshair size can be set using the cl_crosshairsize console command. The larger the value of the parameter, the larger the scope size. Command usage examples:
cl_crosshairsize 0
cl_crosshairsize 5
cl_crosshairsize 10
Distance between lines of sight
The cl_crosshairgap command allows you to decrease or increase the distance between the lines of sight. In fact, this console command changes the size of the CS:GO crosshair to some extent. It can take both positive and negative values as parameters:
cl_crosshairgap -5
cl_crosshairgap 0
cl_crosshairgap 5
Sight line thickness
You can adjust the thickness of the crosshair lines using the cl_crosshairthickness console command: the larger the value of the parameter, the thicker the crosshair lines. Examples:
cl_crosshairthickness 0
cl_crosshairthickness 3
Glad to see you. Playing Counter-Strike: Global Offensive comfortably is an important part of the game. One of the factors is that what we see the most throughout the game in the center is our crosshair. Many professional gamers customize it for themselves and do it for a reason. All modifications will go through the console, as this is the more flexible way today. If for some reason you do not know how to enable the console in the game, I recommend reading this. If you do not want to read a lot, I advise you to watch the video clip, which is located at the very bottom.
All scope settings start with the command: cl_crosshair, you will notice it again and again.
The game has a team that is responsible for style sight: cl_crosshairstyle X, where X is the desired style. Command value from 0 to 4.
Now let's choose a crosshair color that we'll play with throughout the game. To change the color, the command obeys us: cl_crosshaircolor it has five digits:
- 1 - green
- 2 - yellow
- 3 - blue
- 4 - blue
- 5 - own color
Sight with a dot in the middle
Many people do not like that there is an empty space in the middle of the sight, you can fill it with a dot, for this we paste it into the console: cl_crosshairdot 0 - turns off the point, 1 - turns it on.
Crosshair stroke
If you can hardly see the outlines of the risks of the sight, you can stroke: cl_crosshair_drawoutline- 0 without stroke, 1 - with stroke. In addition to the main command, there is also an accompanying one: cl_crosshair_outlinethickness from 0 to 3, it sets the thickness.
Transparency
Do you want to make an invisible sight? Master barin use the command: cl_crosshairalpha 0 , if you are not a wild pervert, you should set the value to 255 - this is the maximum number at which the sight will be clearly visible on any texture.Crosshair size in cs:go
The size of the sight has no limits, so you can enlarge it to full screen or give it a more convenient size for shooting. For this you need the command: cl_crosshairsize from 0 to infinity. Don't set a high value unless you're practicing throwing grenades, where you need to understand the flight path and where to start throwing from.
Distance between lines
When you first start the game, the distance between the lines is too large and it is not convenient to aim at the enemy. To avoid this problem, use the command: cl_crosshairgap. For example, I set myself a number: -4 .
Line thickness
Thick is good, especially if it is a sight, because it is better seen. Okay, jokes for 300 aside. Team: cl_crosshairthickness you can set any numbers, but only positive ones, an example is shown below in the image.
Display
If it happened that you entered the game or installed cfg and you do not see the crosshair, write the following in the console: cross hair 0 - crosshair is not displayed, 1 - becomes visible.Map for sight adjustment
If you don't want to write each variable manually, there is a map in the steam workshop called: Crashz'Crosshair on the map, there is everything that we described above. To download, you need:- Open steam, community > workshop;
- In the search, enter the name of the game and after the name of the map;
- We go to CS: GO;
- Click play with bots and go to the workshop tab and launch our added map;
