Which team should privatize the house. Minecraft, easy ways to privatize territory
Here it is described how to secure your territory in Minecraft, it will be useful for any crafter.
One of the first things you should do when finding a place to build is.
There are many people in the game who want to break your house, which you have been building for so long, which is why it needs to be protected.
Some theory for beginners:
For private, the territory is divided into special regions called cubanoids, cuboids, and so on. This territory is given by 2 points located at the corners. To create a territory to be privatized, it is necessary to mark 2 opposite points of the house that needs to be privatized.
In the screenshot, I showed 2 points that need to be marked in order to make it possible to make a private territory.
I chose an ax as a weapon for private, which is why we will consider private territories with an ax:
Enter command in chat //wand and get the ax needed for private.
Attention: In order to select a point, you need to aim at the block you have chosen, then press LMB to create the first point and press RMB to create the second point.
Having done these simple steps, if you have not made any mistakes, then 2 messages should appear in the chat:
Let me explain a little what these entries mean so that newcomers do not get confused at the very beginning. In brackets you see numbers, they show the coordinates of the points that you have set, as well as the size between these points, that is, the area of the privatized territory.
The area you privatize will be highlighted with a red grid. At this point, experienced players would note that this grid does not cover the entire house, and therefore it is vulnerable, which means that we forgot something ...
In fact, of course, we haven’t forgotten anything, I just want to teach you everything that I know myself, and this must be done consistently so that the information is easier to perceive.
So the next step, we need to extend the private territory in different directions, is done by this command: // expand
It is important to know how the command is entered correctly, and it is done like this:
//expand (set distance in blocks) [set direction]
// expand 60 up- increases the region by 60 blocks up
// expand 40 down- increases region 40 blocks down
Don't forget to constantly check your changes. Maybe I'm paranoid of course, but go around your protected territory and check whether everything that is necessary is protected or not. If everything is protected, then save the selected area with the command: /rg claim (region name).
Note: As the name of the region, you can use absolutely any name in Latin. For example, I call my territories simply by my name.
As an example, I will name the territory testhome. If you did everything right, you will see the following message:
If the message does not appear, but some kind of error is generated, then at the end of this article I will try to talk about the most common errors among players and how to solve them.
After all this, your territories in Minecraft are under reliable protection. None of the other players will be able to break or build anything else on your territory. It belongs only to you and you can do whatever you want with it.
Some additions:
We make a private territory for two in Minecraft, for this there are 2 special commands:
/region addmember (your region) (player nickname)
/region addowner (your region) (player nickname)
The difference between these commands is that the first one you add a player to your region as a friend. He will be able to build something, but he will not have the rights to manage the territory.
The second command, as you probably guessed, allows the other player to use the territory at his discretion. That is, YOU give full power over your home and everything around it. I would not recommend giving such rights to a person in whom you are not sure.
Important: Having staked out the territory, you could make a mistake when saving, so the only way, to change something, for example, to expand an already saved territory, this is the removal of the old and the creation of a new territory.
In order to remove private from the territory, you must run the command: /rg delete (region name)
Remember above I said that errors can occur, so here are the most common ones among crafters who asked me questions:
Region with that name already exists!- Everything is simple here, you are trying to create a territory with the same name as before, just change the name and save, everything should work...
This region overlaps with someone else's region!- The territory that you decided to privatize has already been staked out by someone before you, it will not work to take this territory away, so walk along the border and choose the territory that would not intersect with the neighboring one.
This region is too big! Max. allowed size is 600.000- The greed of the fraer has ruined, you are trying to appropriate too large a piece of land, the game has a limit on the territory of one plot from 600 thousand cubic meters. It would seem a lot, but if this error occurs, then you are not enough.
You own too many regions!-In total in the game it is possible to occupy only 3 territories. Therefore, if you need this particular territory, then by sacrificing an unnecessary one, deleting it, you can privatize a new one.
20-02-2019To protect a zone, you must first select it.The selection of the zone is made with a wooden ax (enter the //wand command).
Any zone allocated by WorldGuard is a Cuboid (or Cuboid). That is, it can be rectangular, square, and so on, but it cannot be a complex shape. In the game, it stands out with only two dots.
In this picture, these points are A and G. 
World Guard - Private territories - plugin management commands
The basic way to select a region:
In one cube, poke with the left button with a wooden ax in hand, and in the other cube - with the right button. These will be the extreme opposite points of our cuboid - A and G from the picture.
However, this method is not always convenient. He forces us to build high pillars and dig deep holes.
To make this job easier:
// expand<длина> <направление>- This command expands the region in the specified direction.
Example: //expand 5 up - Expand the selection by 5 cubes up.
// contract<длина> <направление>- Reduces the selection of the region in a given direction.
Example: //contract 5 up - Reduce selection by 5 cubes from bottom to top
Possible destinations:
1. up
2. down
3. me
The first two expand up and down, and the last one is where you look.
The contract command needs additional comments.
If you specify the direction me, then the region will decrease by the specified number FROM you. Accordingly, if you specify the up side, then the region will decrease from the bottom up, that is, the lower border will rise up. There is also a third argument, between the first and the last. It allows you to specify the amount of reduction of the region on the other side, in the other direction.
//shift<длина> <направление>- Shifts the entire selection.
Example: //shift 5 down - Will shift the selection 5 cubes down
There is another way to specify these two points.
Teams:
//hpos1
//hpos2
Set points in the cubes you are looking at, i.e. where the cross in the center of the screen is pointing.
Each time you change the selection, in brackets at the end of the line, it shows how many cubes are in the region you selected. 
World Guard - Private territories - plugin management commands
Each region has owners (owner) and members (member). Owners can change region settings, and add members and other owners. When you create a region, you are automatically assigned as the owner.
To write to the owners or members of the region, use the commands:
/region addon<регион> <ник1> <ник2>etc.
Example: /region addowner TestRegion Player1 Player2
/region addmember<регион> <ник1> <ник2>etc.
Example: /region addmember TestRegion Player1 Player2
For removing:
/region removeowner<регион> <ник1> <ник2>etc.
Example: /region removeowner TestRegion Player1 Player2
/region removemember<регион> <ник1> <ник2>etc.
Example: /region removemember TestRegion Player1 Player2
Attention, brackets< >You don't need to write ANYWHERE.
For example, the player Vanya wants to build a house for himself.
Vanya selects a region in any way and writes / region claim MoyDom
Now no one but him can build in this region. Then his friends Petya and Vasya come and want to help him.
Vanya writes /region addmember pagoda Petya Vasya
Now Petya and Vasya can help him build a house. When it is finished, and Vanya wants to live in it, and so that no one bothers him, he writes /region removemember Petya Vasya and these players can no longer change cubes inside the MoyDom region.
Regions can be assigned child and parent regions:
/region setparent<регион> <регион-родитель>- In this case, "region" becomes a child region of the "parent region" region.
For such an association, you need to be on the list of owners of both regions.
To remove the parent relationship, you just need to leave out the parent region, i.e. /region setparent<регион>.
If you just select one region within another, they will not be child and parent.
Only the owner of the old region can allocate a new region that partially overlaps the old one.
If you made a mistake when marking the region, and have already saved it, then it can be selected as a selection using the command:
/region select<регион>
You can delete a region using the command:
/region delete<регион>
Now ordinary users can also set flags, but only the owners of the region can do this.
Flags are set with the command:
/region flag<регион> <флаг> <значение>
Flags:
pvp - Is PvP possible in this zone
use - Use of mechanisms, doors
chest-access - Using chests
water-flow - Lava flow
lava-flow - Water flow
lighter - Ignite with a lighter
Values:
deny - disabled
none - the same flag as not in the private zone
allow - enabled
Command - / region info<регион>- displays a list of owners and members of the specified region, and some other information.
You can always find out if a cube belongs to a region by right-clicking with a regular stick.
You will get:
"Can you build? No. or Yes."
The maximum allocate cuboid = 50.000 cubes.
Maximum number of regions per person = 10
HOW TO PRIVATE A TERRITORY IN MINECRAFT [Guide]
Hi all. Today we will talk about a very important process, namely, how to privatize territory minecraft. At least the server (like the majority) must have the WorldEdit plugin installed, or its analogues.How to select a region in minecraft
There is nothing difficult in this procedure if you understand what is at stake. There are several ways to select a region. Most popular with a wooden hatchet. To get it you need to write to the chat //wand .
now you need to select two diagonal points with this hatchet:
1. Select the lower point of our region with the left mouse button, and then move the highest point and place a block (if it is air), press right key mice. Strictly 1 time. If coordinates appear after your actions, then you are doing everything right. But, look at the picture below, this is an example of a private house. 
The purple cube is the highest point, and the green one is the lowest. That is, a certain diagonal passes. Remember? Move on.
Next, we write 2 commands in the chat:
// expand 20 down // expand 20 up So where down - marks 20 cubes down, and where up - then 20 cubes up. You can write height and depth (numbers) for yourself.
Many probably think: why mark in depth and height if there is a floor and a roof. The answer is simple: there are griefers who will dig a hole under you for example or something. and so you protect your home completely from everyone.
Another equally easy way to secure the territory.
We get up on a low point and write to the chat //pos 1, go to the high point and write //pos 2. They mark the region in the same way as the hatchet, but only in teams. And the main plus, where our sight is directed, will be noted.
Rule number one: select points, only diagonally.
We will privatize the territory
We have decided on the territory, allocated it, and now it must be privatized. To do this, we need to register in the chat /rg claim name(name of your private). That's it, we've created a restricted region. We can also add co-owners and so on. Rule number two: do not add the first players that come across to the region, they can be griefers.To add a co-owner, you need to write to the chat:
/region addowner name_of_our_region friend_nick1 friend_nick2 This way you have added two co-owners to your region. Now we need to remove these two co-owners. Then write to the chat:
/region removeowner name_of_our_region friend_nick1 friend_nick2
Protection of a private region (private)
To fully protect the private, you need to set flags - some restrictions on the functionality while staying in the region.Flags are edited by the command
/region flag region_name flag_name value Total values 3:
deny - denied allow - allowed none - not specified Flags:
Pvp - prohibits / allows an attack on you. Sleep - prohibits / allows sleeping on the territory. Creeper - explosion - disables/allows creepers to explode. Lighter – forbids/allows the use of a lighter (including the owner) Lava - flow – forbids/allows pouring lava Potion -splash - forbids/allows damage from potions Water - flow – forbids/allows the use of water Ghast-fireball - forbids/allows the use fireball Use - allows/prohibits the use of mechanisms, good protection from griefers Chest-access - disables\allows the use of chests An example of a command to disable the use of chests:
/region flag House chest-access deny By setting the flags correctly, you can protect your house from any griefer or PvPshnik.
How to check the territory for private
To check if a region is locked, region name in minecraft and other information about the region, you should take a stick and hit the block in the territory, after which the information will appear in the chat.Commands for private in minecraft
These are additional private commands in minecraft
/region delete region_name - delete region Commands for moving or increasing a region. Select a new region and enter in the chat: /region redefine region_name /region move region_name /region update region_name /rg addowner player_nick_region_name - adds a full co-owner AND removes /rg removeowner player_nick_region_name /cprivate - property protection /region list - list of regions This is basic information about the privacy of the region. We tried to cover the topic as detailed as possible " How to privatize a territory in minecraft?"to make it easier for beginners to play minecraft.
And if you still haven't found a client for the game, we offer you
Building pompous structures in Minecraft is a lot of fun, and doing it with a friend is doubly. To protect your work from encroachment, you should think about the privacy of your territory. There are several methods to complete this process.
The first and easiest way
You need to select the territory you need with a wooden hatchet. This tool can be made independently, or you can use the //wand command, which will give us it. With a mouse click, we must select the territory we need. If the proposed territory is rectangular, then only two opposite corners of our site need to be selected. The game will understand that it is this rectangular area that needs to be selected.
Method two
Less convenient, but also quite often used for private. We need to use the //pos 1 command, which will mark the first corner, and the //pos 2 command, which will select the second corner.
After designating the desired territory, you need to carry out the actual privatization process. This option helps to determine the circle of people who can break and build in your location. Private is done using the /rg claim command, and after the command you need to add the name of your territory. More clearly in the video:
How to privatize a house in minecraft
AT wide world many players are also involved in construction, which means that your architectural masterpieces may be at risk. They can simply be dismantled for their needs, which is very unfortunate, because they could spend a lot of time. You can also lock the house with a hatchet. We select two points of our site diagonally, any two corners of our site. Next, you need to specify the size of the territory in the line. // expand - this command will privatize the area, next to the word we write the approximate number of blocks, and then how many blocks up XX and down XX. Detailed description here
How to privatize a door in minecraft
The house is our little fortress in the open spaces of Minecraft. In it you can keep a chest with various necessary gizmos. True, if there is no private, then many can rummage through it. I think no one wants this, and therefore it is worth thinking about the security of our property. The /cprivat command, coupled with the right mouse click, will close access to the item to everyone except you. Locked use can be installed on the door, chest and other furnishings of your humble hideout. As in the case of private territory and house, you can add your friends to the list. These people can use objects and perform various actions on them. Little video guide:
Today let's look at some of the nuances that arise in the process of studying and direct play in that interesting world! More precisely, you will learn how to secure a territory in Minecraft from other players, and what commands are available for this. We hope that our advice will help you find answers to all the "overwhelming" for you game questions, and you can play calmly, not paying attention to the behavior of other users.
Introduction
Unfortunately, some players behave not quite adequately in online games, and therefore, sooner or later, all real-time crafters are wondering how to protect their playing area from attacks and encroachments of other amateurs. There is only one answer - to make your gaming territory private and play quietly on. But how to carry out the “privacy” procedure, and what will this gaming privilege give us?
Please note that some of the servers allow you to "lock" not only large gaming areas, but also individual elements of the game. For example, you can protect your chest with inventory or resources from "enemies". The good news is that the chest does not have to be in the territory that was "privatized" by you. This action is also possible on the territory of other users, or in the general area of the game.
You also have the opportunity to make a lock and private doors. This feature will allow you to restrict access to your home without resorting to "privatization" of the whole site, or in order to prevent access to the house of friends who already have the right to play in your private zone.
What is a private region?
First of all, remember that a private region, or "private" for short, is a crafter's personal playground, on which, according to the rules of the game, only the owner can carry out actions. This territory is freed from the encroachments of mobs, creepers, griefers and other "interesting" charms of the game. If desired, the owner of a private region has the opportunity to:
- modify the initial settings of the private;
- invite, give access and delete friends;
- change the game parameters by entering the appropriate commands in the chat.
As you can see, private is a rather interesting addition to the main game. Enabling this feature is fairly easy. In addition, you can always remove the private zone or simply reverse the procedure to give everyone access to this playground.
How to private in Minecraft?
We figured out why you need a private zone. Let's now look at how to privatize a territory in Minecraft. Let's start with the simplest - make your home personal (private).
In order to make the chosen dwelling a private zone, you will only need one tool - a wooden hatchet. With it, you can mark the coordinate points (corners) of your future personal territory. It is not necessary to create an ax: you will need the “//wand” command in the game chat. If someone does not know or forgot, for this you need to press the "T" key on the keyboard and open the chat. As a result, the ax will appear in stock in your inventory.
The next step is to determine the boundaries of the future personal zone. To do this, in the corners you need to put any block (cube). Pay attention to the size of the blocked zone you have chosen, because very often there is a limiter on the servers. If you select a zone larger than the limit, you will be shown a message about exceeding and an error.
So, the first block (dice) has been set, but it is desirable to make a strategic reserve - three more blocks at the upper and lower coordinate points are enough. In essence, you first select one lower point, and then diagonally opposite the upper point. For example, if the lower coordinate is placed in the right corner, then the second point will be the upper left corner.
Well, we figured out the basic rules, and now we move on to the direct private procedure. We select a wooden hatchet in the inventory, go to the first point we have chosen (the corner of the future private zone) and, by clicking the mouse button (left) on the block, we designate the first corner. You can also carry out and prescribe these actions directly in the game chat. To do this, stand on the initial block and type "/pos1" in the chat. A program message with the coordinates of the first point should appear on the computer monitor.
We carry out a similar procedure with the opposite coordinate point of the future private territory, only in this case you need to right-click. In chat, the command will look like this "/pos2". Recall that the chat is called on the screen using the "T" key. Do not be surprised that the program message in this case has two brackets. In the second bracket, you are shown the number of blocks that the private area will consist of.
Note! If the server has a limit on private zones, then exceeding this figure, you will most likely receive a software error message as a result.
Now the private area has been selected and marked - it remains to give it a name, as well as register a personal site. To do this, in the chat (key "T") type the command task "/ rg claim<название участка>". You can also use the more advanced option "/ region claim<название участка>". Remember that the name of the private zone in the directive is entered without brackets. As a result, you will receive a message in the chat about a successfully installed region with the selected name.
How to find out the name of a private region?
There are cases when a player or minor owner forgets the name of his private zone. In such a situation, the following steps must be taken:
- create a stick using a workbench;
- we get up in the privatized zone and take a stick in our hand;
- on one of the blocks included in the private, right-click: the chat will display the name for you.
There is also an alternative option, for this, in the same chat, you need to enter the "/rg list" directive.
How to add or block a friend in the private zone?
According to the rules of the Minecraft game, a private area is a player's personal playground. In order for your partner to still play in your private zone, you need to carry out an access procedure for him. Again we turn to the chat and enter the command task "/ region addmember [name of the private territory] [name (nick) of the player to be added]".
There are times when a friend who has gained access to your territory begins to interfere with your enjoyment of the game: breaks and steals your things. Then it is better to block such a "friend". To block an annoying user, enter the following directive: "/ region removemember [zone name] [nickname of the gamer to be removed]".
We remind you that all commands are entered in the chat. Please note that you can only delete friends individually, you cannot delete a group of users. To obtain complete information about a private zone, you must enter the command "/region info [private name]". The monitor will display information about the owner of the territory, the type and priority of the site, the list of allowed users.
Flags for private in Minecraft
Recall that a private region is the territory of a crafter who has the right to either use the set private parameters or change them at will. That's what flags are for. Note that flags can be used to either allow or prohibit certain activities on your territory. Keep in mind that the ban will apply not only to authorized users, but also partially to you, as the owner of the zone.
How to apply them? To apply the flag, you need to enter the following directive in the chat: "/region flag [private region name] [flag name] [option]". The parameter can be either "deny", in which case the action is prohibited, or "allow", in which case the action is allowed. The value "none" indicates that the effect of this flag is undefined.
The following flags exist in the Minecraft game:
Commands for private territory and other actions
We hope that our tips have helped you, and you will play with even more enthusiasm. computer game Minecraft!
Video
We are waiting for your comments, feel free to write!
